OxyFile #523

Ozone Generation Methods
("Ultra-Violet", "Cold-Corona", & "Cold-Plasma")

By Tom Harrelson

Reprinted with Permission


Basically, there are 2 ways by which OZONE is produced naturally--
the Ultra-Violet rays of the sun and lightning.  There are 3 
practical commercial OZONE Generation Methods--"ULTRA-VIOLET" 
(simulating the Ultra-Violet rays of the sun) or "COLD-CORONA" and 
"COLD-PLASMA" (simulating lightning).  First, let's take a look at 
the "ULTRA-VIOLET" OZONE Generation Method.

The "ULTRA-VIOLET" OZONE Generation Method utilizes a special 
silica quartz glass Ultra-Violet lamp that emits a narrow band of 
frequencies with a peak frequency of 185 nanometers, resulting in 
a low amount of OZONE (2%) and a very low amount of nitrogen oxide 
compounds (.1%) being produced, when air is used as the input gas.  
Next, let's check out  the "COLD-CORONA" OZONE Generation Method.

The "COLD-CORONA" OZONE Generation Method utilizes special dual 
dielectric electrodes that produce a lower temperature, resulting 
in very high amounts of medical-grade OZONE (up to 20%) being 
produced, when oxygen is used as the input gas and low amounts of 
nitrogen oxide compounds (1%) being produced, when air is used as 
the input gas.  Lastly, let's check out the "COLD-PLASMA" OZONE 
Generation Method.

The "COLD-PLASMA" OZONE Generation Method utilizes a glass vacuum 
tube enclosing noble gases that produce a higher reliability, 
resulting in very high amounts of medical-grade OZONE (up to 18%) 
being produced, when oxygen is used as the input gas and low 
amounts of nitrogen oxide compounds (1%) being produced, when air 
is used as the input gas.

The "ULTRA-VIOLET" OZONE Generation Method, utilizing air as the 
input gas, is the most cost-effective way of producing pure 
uncontaminated OZONE for use in purifying the air and water for 
the home.  Whereas, the "COLD-CORONA" or "COLD-PLASMA" OZONE 
Generation Methods, utilizing air as the input gas, is the most 
cost-effective way of producing pure uncontaminated OZONE for use 
in purifying the air and water for commercial establishments.  And 
the "COLD-CORONA" or "COLD-PLASMA" OZONE Generation Methods, 
utilizing oxygen as the input gas, is the most cost-effective way 
of producing medical-grade OZONE for use in detoxifying the body.  
The "COLD-PLASMA" OZONE Generation Method is the most reliable of 
the 2 methods, because of the unique construction techniques, and 
materials that were researched, developed, and manufactured by 
Nikola Tesla.  In fact, there are many original Teslaire units 
still in use today, operating without failure from the 1920s.


OZONE Fact Sheet No. 5-Med.>11/96